You will be stunned by how fast Ableton runs when loaded from an SSD. I recommend using an SSD for your applications and sample libraries. SSD’s will start up literally instantaneously and since they have no moving parts the read and write time is remarkably faster. If you are fortunate enough to have an SSD in your computer then you will have a lot less problems with your sessions. I had a large session that froze like this one time and it could never be opened again because the RAM could not load the session properly. Try sticking with 44100, if you are having computer issues.īe sure to store backups of your sessions. Be careful to pay attention to the disk usage when doing this to not get an “Out of Memory” message.Īlso you can try to use a lower “Sample Rate” for your sessions. To avoid this you can select “RAM” button in the Sample box. The overload will be indicated by the orange “D” icon in the top right of the screen. If you are experiencing dropouts in audio or crackles during playback this is a Disc Overload error. You will want to make sure that “Multi Core” Processor support is enabled if your computer has multiple processors. The next thing you will want to do is visit the CPU tab. If you use a higher buffer size during recording Ableton will actually place the Audio in the session with the latency causing your audio to be out of time. Try 128 or 64 to keep your audio from having latency when recorded. If you are recording audio you will need to set your buffer to a lower setting. Typically 256 or 512 are what I like to use as my buffer size. Next we will cover the “Latency” section and “Buffer” size. Try using 44100k instead and this will free up a lot of CPU. I prefer to do everything at 96k and 24Bit, However, this will gobble up your CPU power very quickly.

Ableton will see this as active if not de-selected and this can affect the audio processing power. You will want to turn off any “Input” or “Output” channels that are on in your “Channel Configuration”. Once you are in your Ableton Live preferences select your “Audio” Tab. Here are a few tips that will help you get your sessions and computer fine tuned and ready to rock.

In the days of digital audio production we have a whole new set of problems to deal with. BUT all in all, I can wait a generation or two on the MacStudio.#Tips 5 Easy Ways to Maximize Performance in Ableton Live I think I can get a motherboard with thunderbolt 4 from ASUS for $ 250, to get myself the throughput on my MOTU device for better latency. I should be able to record 24 tracks with basic channel strip plugins without noticeable latency with this machine. I could work at 75 tracks with NO POPS at all at 128 samples. I was able to do 200 tracks with no pop at 256 samples. I was able to do 250 tracks with a single pop at start… at 256 samples. I back off ten tracks at a time until there was absolutely no pop when I hit PLAY. If i could live with the pop at the pressing of the play button… well, I quit at 450 tracks. I was able to get 329 tracks to play with a “pop” when I hit play. I replaced the 2700x cpu since the 5950x went on sale… I was debating do I get the MacStudio with an m1 max or wait for the next ryzen cpu out this fall? I did a test a while back with this system:Ĭyberpower Master Gamer 2017 Ryzen 2700x 64gb.

Ableton live suite 10 specs optimal